Basic Info.
Model NO.
could be customized
Certification
GS, RoHS, CE, ISO9001
Work Temperature
Normal Temperature
Working Method
Straight Trip
Adjusted Form
Regulated Type
Size
Could Be Customized as Per Your Requirements
Transport Package
Carton Box
Specification
stroke: 80- 1200mm, diameter: 10-100mm,
Product Description
Introduction:
1. DALLAST single acting sleeve cylinders provide value through proven reliability, efficient performance and the quality that you expect from every DALLAST Cylinder Division product line.
2. The length of a hydraulic cylinder is the total of the stroke, the thickness of the piston, the thickness of bottom and head and the length of the connections. Often this length does not fit in the machine.
Benefits:
• Snap on glass filled bearings that absorb contaminants without damaging cylinder walls
• Nylon tipped set screws that conform to packing nut threads to decrease the probability of packing nuts backing off
• 12 months warranty
• Single-acting cylinders transfer force and motion in one direction only.
Mounting option:
It has FC, FE, FEE.
TG series hydraulic cylinder for vehicle |
specification | pressure (MPa) | bore size (mm) | mounting length (mm) | stroke length (mm) | push |
first stage | last stage |
4TG-E180*200 | 16 | 180 | 140 | 800 | 410 | 210 |
4TG-E160*200 | 16 | 160 | 140 | 800 | 320 | 170 |
3TG-E150*250 | 16 | 150 | 140 | 800 | 280 | 145 |
5TG-E130*150 | 16 | 130 | 140 | 750 | 210 | 110 |
3TG-E130*300 | 16 | 130 | 140 | 900 | 210 | 110 |
4TG-E110*340 | 16 | 110 | 140 | 1360 | 150 | 32 |
3TG-E110*510 | 16 | 110 | 140 | 1530 | 150 | 60 |
3TG-E110*450 | 16 | 110 | 140 | 1350 | 150 | 60 |
3TG-E110*340 | 16 | 110 | 140 | 1020 | 150 | 60 |
3TG-E110*300 | 16 | 110 | 260 | 900 | 150 | 60 |
2TG-E110*510 | 16 | 110 | 140 | 1020 | 150 | 100 |
Hydraulic cylinder seals:
Low friction, high load piston seals with outboard wear bands are standard. Loaded lip seals and cast iron rings are optional.
Hydraulic cylinder rod:
High strength damage resistant piston rod provides 100,000 PSI minimum yield material in 1" through 4 1/2" diameters. Larger diameters vary between 50,000 and 75,000 PSI minimum yield material. All rods are case hardened to 50-55 RC and hard chrome plated to provide maximum wear life. Stainless steel is also available. The hard chrome plated of the piston rod according to your requirement.
Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring - grinding - car processing - black nitriding and many other processes.
3. The company accepted the Valet processing various types and various sizes products, processing and processing more quotes, welcome to consult.
After-sales service:
1. Various operation instructions such as: products inspect and control ,Receiving inspection control ,sampling inspection operation instruction, process quality inspection operation instruction etc
2. Pre-sale service and free consultation service.
3. Quality control service includes pre-acceptance, departure inspection, arrival inspection, PDI delivery inspection.
4. Guarantee period is subjected to warranty instruction (1 year/ 2000 hours whichever comes first).
5. Free after-sale service during the warranty refers to problems caused by quality issues; any non quality problem occurred, we will charge the maintenance fee according to relevant standard.
6. Service Center all over the world for after sales problems.
How to choose:
1. Choice will depend on the operating conditions of the unit. It is necessary to determine the precise physical characteristics and geometry of the installation.
2. The bore, or cylinder diameter will determine the amount of force the piston can apply. Rod characteristics, usually standardized, fastening system, damping and stroke are other important factors.
3. Stroke, in particular, is an essential specification, since it defines the distance the piston travels between its initial and its final position.
4. Additional criteria include the use of presence sensors to indicate the position of the piston, the seals, purge and drain valves, type and temperature of the hydraulic fluid.
Application:
TG series of telescopic sleeve hydraulic cylinder single action plunger type multistage cylinder vehicle, is a vechicle compartment in the lifting cylinder through the ball head hinge, hinge shaft and other connection earrings, mainly used for unloading and unloading trailers and semitrailers to the three side discharge, after the derivaties of QTG series multitage; hydraulic cylinder for dump trailer system, environmental clean car, can also be used for other hydraulic device.
Specification:
Application | dump truck for engineering machinery, small vehicals |
Material of cylinder tube | steel, stainless steel, alloy steel, carbon steel and 27SIMN |
Coating | All tubes are chrome plated |
Working pressure | 12MPa-36MPa |
Bore size | 40mm-800mm |
Color | Any color, if you needed |
Mounting Type | Earring-tunnion, double tunnion, double earring (eye end) |
Plunger | 20#, 45# steel with high frequency quenching |
Certification | ISO9001:2008, SGS, TS16949 |
Warranty | One year |
Working temperature | -30° C to 80°C |
Model No | could be designed |
Stroke | 500-1500mm |
Package | Shrink film, pallet, plywood case, carton box |
Main export market | USA, Canada, South Korea, Russia, Australia, Malaysia, Fiji Island, Kenya, Philippines, Singapore |
payment terms | T/T, L/C, D/A, D/P AND SO ON |
Delivery time | 30 days after down payment |
Seal | Hallite,SKF,NOK,Guarnitec,Parker, Hyva |
Any types of Machinery Model could be designed according to your requirement.
If you're interested in our products, please contact with us.
Send us your drawings and the main parameters:
A.
1. bore size
2. stroke length
3. rod diameter
4. mounting type
5. mounting length
6. paint color requirement
B. the pruduction application description details
1. type of machine (loader, steer loader, excavator and ect.)
2. type of function (hoist, swing, steering, and ect.)
3. type of struction (piston, telescopic)
4. single or double acting
5. operating pressure
Address:
Adress 1: 1436, Building B, Qinghu Technology Park, Qingxiang Road, Longhua District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Dallast Technology Co., Ltd. is a hydraulic cylinder manufacturing enterprise integrated with professional designing, production and sales. Company focused, specialized in various types of hydraulic cylinder. Is widely used in dump trucks, dump trailers, garbage trucks, excavators, loaders, forklifts, cranes and other projects, ships, mining machinery and fire engines, sanitation vehicles and other special vehicles, agricultural machinery, heavy machinery and many other fields.
Over the years we have grown into a diversified market based that now services customers all over the world.
ENTERPRISE CONCEPT
-We are professional manufacturing expert of Hydraulic Cylinders
-Service customer, Strive for excellent quality
-Scientific management, Unity and efficiency
MAIN PRODUCTS
1 Hydraulic system
2 Garbage truck cylinder
3 Tractor hydraulic cylinder
4 Under body hydraulic cylinder
5 Special equipment hydraulic cylinder
6 Telescopic front end hydraulic cylinder
7 Single acting telescopic hydraulic cylinder
8 Hydraulic cylinder for engineering machine
9 Rice/Corn combine harvest hydraulic cylinder
10 High precision cold drawn pipe/High precision piston rod...
If your company need specialize requirement, we can customize for you